CUSTOM SKIP Unit Availability: 8’3” units with trimbacks developing  available in 4/4, 5/4, & 8/4. 4/4 12’ available.  CUSTOM SKIP grade is used by customers who may want a thinner net finish for panel production, cabinetry, and furniture. CUSTOM SKIP consists of boards that will grade as Custom Shop when re-dressed 0.13 inches (3.30 mm). Widths:  3.5 inch (88.90 mm) minimum. Lengths:  72 inch (182.88 cm) minimum. Minimum Size Cuttings: 3 inches (76.20 mm)  by 36 inches (91.44 cm)  or 4 inches (101.60 mm)  by 24 inches (60.96 cm) C1F.  No Limit to the number of cuttings allowed. Grade Notes: This grade admits all boards of 24 inches (60.96 cm) and over surface measure yielding not less than 66.66 percent clear, one face (C1F) cuttings with the reverse side of the cuttings sound as defined in "SOUND CUTTING". Side bend, as defined in "SIDE BEND" limited to 1inch (25.40 mm). Pin knots, as defined in "PIN KNOTS" are not considered defect. Skip less than 0.100 inch (2.54 mm) (depth combined from both faces) is not considered defect.