CABINET SKIP Unit Availability: 8’3” units with trimbacks developing  available in 4/4, 5/4, & 8/4. 4/4 12’ available.  CABINET SKIP grade is used by customers who may want a thinner net finish for panel production, cabinetry, and furniture. CABINET SKIP consists of boards that will grade as Cabinet when re-dressed 0.13 inches (3.30 mm). Widths:  3.5 inch (88.90 mm) minimum Lengths: 72 inch (182.88 cm) minimum Minimum Size Cuttings: 3 inches (76.20 mm) by 36 inches (91.44 cm) or 4 inches (101.60 mm) by 24 inches (60.96 cm) C2F. No Limit to the number of cuttings allowed Grade Notes:  This grade admits all boards of 24 inches (60.96 cm) and over surface measure yielding not less than 66.66 percent clear two face cuttings. Boards are graded from the poorer face. SIDE BEND is limited to 1 inch (25.40 mm). PIN KNOTS are not considered defect. Skip less than 0.100 inch (2.54 mm) (depth combined from both faces) is not considered defect.